Professional China Twisted Nickel Plated Copper Conductor - Nickel Plated Copper Stranded Wire – Tianchuang
Professional China Twisted Nickel Plated Copper Conductor - Nickel Plated Copper Stranded Wire – Tianchuang Detail:
Stranded wire
| Model | Name |
| JY | Silver Plated Copper Stranded Wire |
| JN | Nickel Plated Copper Stranded Wire |
Specification
| Size Range(mm²)Nominal Cross Section | Single Wire Diameter（mm) | |
| JY | 0.002-16 | 0.05-1.5 |
| JN | 0.05-16 | 0.08-1.0 |
Raw materials and product standards
| Wire And Cable For Aerospace | GJB1640 |
| Silver Plated Copper Wire | JB/T3135 ASTM B298-99 |
| Nickel Plated Copper Wire | GB11019 ASTM B355-95 |
DC resistance （Ω/KM,20℃）
| JY, JN |
GJB1640-93 specified in tables 2, 3 |
Coating
1. Coating evenly,good continuity, strong adhesion.
2. The surface of the coating is smooth and continuous without harmful defects such as silvery burr mechanical damage.
Inspection rules
Product inspection: incoming material inspection-process inspection-finished product inspection, finished product inspection qualified factory, each batch of products is accompanied by quality inspection certificate.
Packing and delivery
1. The mono-filament and its winch are supplied in plates, and then packed and delivered in boxes after proper packaging with Kraft paper and packaging film. The small size disc is fixed by custom foam, and the large size plastic rubber disk or iron disk is fixed by custom wooden frame.
2. The mono-filament and its strand are evenly wound on the wire shaft, the wire arrangement is not pressed, the wire head is fixed, and the outermost side of the wire is kept at a certain distance from the edge of the disk, so as to avoid collision in the course of transportation.
Product detail pictures:
Related Product Guide:
Our firm sticks to the basic principle of "Quality is the life of your company, and status will be the soul of it" for Professional China Twisted Nickel Plated Copper Conductor - Nickel Plated Copper Stranded Wire – Tianchuang, The product will supply to all over the world, such as: Slovenia , America , Norwegian , We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.
By Chris Fountas
from Mauritius
- 2018.05.13 17:00
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Mike
from Switzerland
- 2018.07.26 16:51
