Good Quality Nickel Plated Copper Stranded Wire - Nickel Plated Copper Stranded Wire – Tianchuang
Good Quality Nickel Plated Copper Stranded Wire - Nickel Plated Copper Stranded Wire – Tianchuang Detail:
Stranded wire
| Model | Name |
| JY | Silver Plated Copper Stranded Wire |
| JN | Nickel Plated Copper Stranded Wire |
Specification
| Size Range(mm²)Nominal Cross Section | Single Wire Diameter（mm) | |
| JY | 0.002-16 | 0.05-1.5 |
| JN | 0.05-16 | 0.08-1.0 |
Raw materials and product standards
| Wire And Cable For Aerospace | GJB1640 |
| Silver Plated Copper Wire | JB/T3135 ASTM B298-99 |
| Nickel Plated Copper Wire | GB11019 ASTM B355-95 |
DC resistance （Ω/KM,20℃）
| JY, JN |
GJB1640-93 specified in tables 2, 3 |
Coating
1. Coating evenly,good continuity, strong adhesion.
2. The surface of the coating is smooth and continuous without harmful defects such as silvery burr mechanical damage.
Inspection rules
Product inspection: incoming material inspection-process inspection-finished product inspection, finished product inspection qualified factory, each batch of products is accompanied by quality inspection certificate.
Packing and delivery
1. The mono-filament and its winch are supplied in plates, and then packed and delivered in boxes after proper packaging with Kraft paper and packaging film. The small size disc is fixed by custom foam, and the large size plastic rubber disk or iron disk is fixed by custom wooden frame.
2. The mono-filament and its strand are evenly wound on the wire shaft, the wire arrangement is not pressed, the wire head is fixed, and the outermost side of the wire is kept at a certain distance from the edge of the disk, so as to avoid collision in the course of transportation.
Product detail pictures:
Related Product Guide:
We are proud of the superior customer gratification and wide acceptance due to our persistent pursuit of top of the range both of those on merchandise and service for Good Quality Nickel Plated Copper Stranded Wire - Nickel Plated Copper Stranded Wire – Tianchuang, The product will supply to all over the world, such as: Luxemburg , Bolivia , Pretoria , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Sahid Ruvalcaba
from Ghana
- 2017.07.07 13:00
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Nick
from kazan
- 2018.07.12 12:19
